热喷涂知识
脚本控制
热喷涂各国标准
GB/T 20019-2005/ISO 14231:2000 热喷涂 热喷涂设备的验收检查 (ISO 14231:2000,IDT)
GB/T 19823-2005/ISO 14921:2001 热喷涂 工程零件热喷涂涂层的应用步骤 (ISO 14921:2001,IDT)
GB/T 19824-2005 热喷涂 热喷涂操作人员考核要求 (ISO 14918:1998,MOD)
GB/T 12607-2003 热喷涂涂层命名方法 (代替GB/T 12607-90)
GB/T 12608-2003 热喷涂 火焰和电弧喷涂用线材、棒材和芯材 分类和供货技术条件 (ISO 14919:2001, MOD) (代替GB/T 12608-1990)
GB/T 19352.1-2003/ISO 14922-1:1999 热喷涂 热喷涂结构的质量要求 第1部分:选择和使用指南
GB/T 19352.2-2003/ISO 14922-2:1999 热喷涂 热喷涂结构的质量要求 第2部分:全面的质量要求
GB/T 19352.3-2003/ISO 14922-3:1999 热喷涂 热喷涂结构的质量要求 第3部分:标准的质量要求
GB/T 19352.4-2003/ISO 14922-4:1999 热喷涂 热喷涂结构的质量要求 第4部分:基本的质量要求
GB/T 19355-2003 钢铁结构耐腐蚀防护 锌和铝覆盖层 指南 (ISO 14713:1999,MOD)
GB/T 19356-2003 热喷涂 粉末 成分和供货技术条件 (ISO 14232:2000,MOD) (代替GB/T 12608-1990)
GB/T 8642-2002 热喷涂抗拉结合强度的测定 (ISO 14916:1999,MOD) (代替GB/T 8642-1988)
GB/T 18719-2002 热喷涂 术语、分类 (ISO 14917:1999,MOD)
GB/T 16744-2002 热喷涂 自熔合金喷涂与重熔 (ISO 14920:1999,MOD) (代替GB/T 16744-1997)
GB/T 18681-2002 热喷涂 低压等离子喷涂镍-钴-铬-铝-钇-钽合金涂层
GB 11375-1999 金属和其他无机覆盖层 热喷涂 操作安全 (代替GB 11375-1989)
GB/T 17456-1998 球墨铸铁管 外表面喷锌涂层 (eqv ISO 8179-1:1995)
GB/T 9793-1997 金属和其他无机覆盖层热喷涂 锌、铝及其合金 (eqv ISO 2063:1991) (代替GB 9793-88,GB 9794-88,GB 9795-88,GB 9796-88 )
GB/T 16744-1997 热喷涂 自熔合金涂层 (由GB/T 16744-2002代替)
GB/T 13222-91 金属热喷涂层剪切强度的测定
GB/T 12608-90 热喷涂涂层材料命名方法 (由GB/T 12608-2003和GB/T 19356-2003代替)
GB/T 12607-90 热喷涂涂层设计命名方法 (由GB/T 12607-2003代替)
GB 11374-89 热喷涂涂层厚度的无损测量方法
GB 11373-89 热喷涂金属件表面预处理通则
GB 9796-88 热喷涂铝及铝合金涂层试验方法 (ISO 2063) (由GB/T 9793-1997代替)
GB 9794-88 热喷涂锌及锌合金涂层试验方法 (ISO 2063) (由GB/T 9793-1997代替)
GB 8642-88 热喷涂层结合强度的测定 (由GB/T 8642-2002代替)
GB 8641-88 热喷涂层抗拉强度的测定
GB 8640-88 金属热喷涂层表面洛氏硬度试验方法
JB/T 4108-1999 热喷涂设备 分类及型号编制方法
JB/T 8425-96 铁基喷涂粉末中铬、镍、钼和钒的X射线荧光光谱分析标准试验方法
JB/T 8427-96 钢结构腐蚀防护热喷涂锌、铝及其合金涂层选择与应用导则
JB/T 7703-95 热喷涂陶瓷涂层技术条件
JB/T 7509-94 热喷涂涂层孔隙率试验方法 铁试剂法
JB/T 6973-93 热喷涂操作人员考核要求
JB/T 6974-93 线材喷涂碳钢及不锈钢
JB/T 5070-91 热喷涂常用术语
YB/T 036.13-1992 冶金设备制造通用技术条件 氧-乙炔焰金属粉末喷涂
YS/T 57-93 热喷涂用Fe-Cr-B-Si系合金粉
HG/T 2044-2003 机械密封用喷涂氧化铬密封环技术条件 (代替HG/T 2044-1991)
YY 0304-1998 等离子喷涂 羟基磷灰石涂层-钛基牙种植体
ASTM标准(The American Society for Testing and Materials)
ASTM B833-01a Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing)
ASTM B907-04 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders and for Thermal Spraying
ASTM C633-01 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings涂层结合强度测定
ASTM D4541 Test Method for Pull-Off Strength of Coating Using Portable Adhesion Testers
ASTM E1920-03 Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings金相制备
ASTM E376-03 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods无损测厚
ASTM F1044-05 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings剪切强度测试
ASTM F1147-05 Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
ASTM F1160-05 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F1926-03 Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Coatings
ASTM F1609-03 Standard Specification for Calcium Phosphate Coatings for Implantable Materials
ASTM F1978-00e1 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the TaberTM Abraser
ASTM F2024-00 X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
ASTM F1580-01 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
DIN (Deutsches Institut für Normung)
DIN EN 582-1994 Thermal spraying; determination of tensile adhesive strength; German version EN 582:1993
DIN EN 657-2005 Thermal spraying - Terminology, classification; German version EN 657:2005
DIN EN 1274-2005 Thermal spraying - Powders - Composition, technical supply conditions; German version EN 1274:2004
DIN EN 1395-1996 Thermal spraying - Accpetance inspection of thermal spraying equipment; German version EN 1395:1996
DIN EN 13214-2001 Thermal spraying - Thermal spray coordination - Tasks and responsibilities; German version EN 13214:2001
DIN EN 13507-2001 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2001
DIN EN ISO 2063-2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005); German version EN ISO 2063:2005
DIN EN ISO 1463-2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003); German version EN ISO 1463:2004
DIN EN ISO 9220-1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988); German version EN ISO 9220:1994
DIN EN ISO 14918-1999 Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998); German version EN ISO 14918:1998
DIN EN ISO 14919-2001 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification; Technical supply conditions (ISO 14919:2001); German version EN ISO 14919:2001
DIN EN ISO 14920-1999 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:1999); German version EN ISO 14920:1999
DIN EN ISO 14921-2001 Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2001); German version EN ISO 14921:2001
DIN EN ISO 14922-1:1999 Thermal spraying – Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use (ISO 14922-1:1999)
DIN EN ISO 14922-2:1999 Thermal spraying – Quality requirements for thermally sprayed structures Part 2: Comprehensive quality requirements (ISO 14922-2:1999)
DIN EN ISO 14922-3:1999 Thermal spraying – Quality requirements for thermally sprayed structures Part 3: Standard quality requirements (ISO 14922-3:1999)
DIN EN ISO 14922-4:1999 Thermal spraying – Quality requirements for thermally sprayed structures Part 4: Elementary quality requirements (ISO 14922-4:1999)
DIN EN ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings
DIN EN ISO 14924-2005 Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005); German version EN ISO 14924:2005
DIN EN ISO 17834-2004 Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003
DIN 27201-10-2005 State of railway vehicles - Basic principles and production technology - Part 10: Thermal spraying
DIN EN 14665-2005 Thermal spraying - Thermal sprayed coatings - Symbolic representation on drawings; German version EN 14665:2004
DIN EN 14616-2005 Thermal spraying - Recommendations for thermal spraying; German version EN 14616:2004
DIN EN ISO 17836-2005 Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2004); German version EN ISO 17836:2004
DIN EN ISO 10308-2006 Metallic coatings - Review of porosity tests (ISO 10308:2006); German version EN ISO 10308:2006
ISO (International Organization for Standardization)
ISO 2063:2005 Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys (热喷涂.金属涂层和其他无机覆层.锌、铝及其合金)
ISO 13779-1-2000 (外科植入物 羟基磷灰石 第1部分:羟基磷灰石)
ISO 13779-2-2000 (外科植入物 羟基磷灰石 第2部分:羟基磷灰石覆涂层)
ISO 13779-4-2002 (外科植入物.羟磷灰石.第4部分:涂层粘结强度的测定)
ISO 14231:2000 Thermal spraying -- Acceptance inspection of thermal spraying equipment (热喷涂 热喷涂设备的验收检查)
ISO 14232:2000 Thermal spraying -- Powders -- Composition and technical supply conditions (热喷涂 粉末 成分和交货技术条件)
ISO 14916:1999 Thermal spraying -- Determination of tensile adhesive strength (热喷涂 抗拉结合强度的测定)
ISO 14917:1999 Thermal spraying -- Terminology, classification (热喷涂 术语、分类)
ISO 14918:1998 Thermal spraying -- Approval testing of thermal sprayers (热喷涂 热喷涂人员的资格考查)
ISO 14919:2001 Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions (热喷涂 火焰和电弧喷涂用金属丝材、棒材和粉芯丝材分类 交货技术条件)
ISO 14920:1999 Thermal spraying -- Spraying and fusing of self-fluxing alloys (热喷涂 自熔合金的喷涂及重熔)
ISO 14921:2001 Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components (热喷涂 工程零件热喷涂涂层的应用步骤)
ISO 14922-1:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 1: Guidance for selection and use (热喷涂 热喷涂结构的质量要求 第1部分:选择和应用指南)
ISO 14922-2:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements (热喷涂 热喷涂结构的质量要求 第2部分:全面质量要求)
ISO 14922-3:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements (热喷涂 热喷涂结构的质量要求 第3部分:标准质量要求)
ISO 14922-4:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements (热喷涂 热喷涂结构的质量要求 第4部分:基本质量要求)
ISO 14923:2003 Thermal spraying -- Characterization and testing of thermally sprayed coatings (热喷涂.热喷涂层的表征和试验)
ISO 14924:2005 Thermal spraying -- Post-treatment and finishing of thermally sprayed coatings (热喷涂.热喷涂层的后处理和加工)
ISO 17834:2003 Thermal spraying -- Coatings for protection against corrosion and oxidation at elevated temperatures (热喷涂.高温下抗腐蚀耐氧化保护涂层)
ISO 17836:2004 Thermal spraying -- Determination of the deposition efficiency for thermal spraying (热喷涂.热喷涂熔敷效率的测定)
AWS (American Welding Society)
ANSI/AWS C2.16/C2.16M:2002 Guide for Thermal Spray Operator Qualification
AWS C2.18-93 Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites
ANSI/AWS C2.23/C2.23M:2003 Specification for Thermal Spray Equipment Acceptance Inspection
ANSI/AWS C2.21/C2.21M:2003 Specification for Thermal Spray Equipment Acceptance Inspection
ANSI/AWS C2.25/C2.25M:2002 Specification for Thermal Spray Solid and Composite Wire and Ceramic Rods
AWS TSS Thermal Spraying
ANSI/AWS C2.20/C2.20M:2002 Specification for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete
BS (British Standards)
BS EN 582-1994 Thermal spraying - Determination of tensile adhesive strength
BS EN 1395-1996 Thermal spraying - Acceptance inspection of thermal spraying equipment
BS EN ISO 14918-1998 Thermal spraying - Approval testing of thermal sprayers
BS EN ISO 14920-1999 Thermal spraying - Spraying and fusing of self-fluxing alloys
BS EN ISO 14922-1-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Guidance for selection and use
BS EN ISO 14922-2-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Comprehensive quality requirements
BS EN ISO 14922-3-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Standard quality requirements
BS EN ISO 14922-4-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Elementary quality requirements
BS EN 13507-2001 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
BS EN 13214-2001 Thermal spraying - Thermal spray coordination - Tasks and responsibilities
BS EN ISO 14919-2001 Thermal spraying, Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions
BS EN ISO 14921-2001 Thermal spraying - Procedure for the application of thermally sprayed coatings for engineering components
BS EN ISO 14923-2003 Thermal spraying - Characterization and testing of thermally sprayed coatings
BS EN ISO 17834-2003 Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures
BS EN ISO 17836-2004 Thermal spraying - Determination of the deposition efficiency
BS EN 14665-2005 Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (热喷涂.热喷涂涂层.图纸上的符号表示)
BS EN 14616-2005 Thermal spraying - Recommendations for thermal spraying
BS EN 1274-2005 Thermal spraying - Powders - Composition, technical supply conditions
BS EN ISO 2063-2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys
BS EN 657-2005 Thermal spraying - Terminology, classification
BS EN ISO 14924-2005 Thermal spraying - Post-treatment and finishing of thermally sprayed coatings
JIS
JIS H8304-1994 Ceramic sprayed coatings
JIS H8306-2002 Cermet thermal spraying
JIS H8200-2006 Thermal spraying terms
JIS H8302-2004 Build-up thermal spraying
JIS H8303-2004 Thermal spraying of self-fluxing alloy
JIS H8250-2005 Graphical symbol for thermal spraying
JIS H8300-2005 Thermal spraying -- Zinc, aluminium and their alloys
JIS H8666-1994 Test methods for ceramic sprayed coatings
JIS H8667-2002 Test methods for cermet sprayed coatings
JIS H9302-1994 Recommended practice for ceramic sprayed coatings
JIS H9303-2004 Recommended practice for cermet sprayed coatings
JIS H9304-2005 Recommended practice of self-fluxing alloys spraying
JIS H8401-1999 Methods of thickness measurement for sprayed coatings
JIS G0594-2004 Methods of accelerated cyclic corrosion resistance tests for anodic coatings with exposure to salt spray, dry and wet condition
JIS H8401-1999 Methods of thickness measurement for sprayed coatings
JIS H8402-2004 Test methods of tensile adhesive strength for thermal-sprayed coatings
JIS H8501-1999 Methods of thickness test for metallic coatings
JIS H8502-1999 Methods of corrosion resistance test for metallic coatings
JIS H8503-1989 Methods of wear resistance test for metallic coatings
JIS H8504-1999 Methods of adhesion test for metallic coatings
UNE-EN 13214:2001 THERMAL SPRAYING - THERMAL SPRAY COORDINATION - TASKS AND RESPONSABILITIES
SAE AS7109/1A Nadcap Requirements for Thermal Spray
SSPC 02-14 Chapter 4.4 Thermal-Spray (Metallized) Coatings for Steel
SAE AMS2447C Coating, Thermal Spray High Velocity Oxygen/Fuel Process
TAPPI TIP0402-32 Guidelines for applying thermal spray coatings to protect pulp mill process equipment against corrosion
SSPC 04-13 SSPC-CS 23.00/AWS C2.23/NACE No. 12 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
SSPC 04-13 SSPC-QP 6 Standard Procedure for Evaluating the Qualifications of Contractors Who Apply Thermal Spray (Metallizing) for Corrosion Protection of Steel and Concrete Structures
SME EM94-115 Thermal Spray Process Of Polymers And Fillers For A Hard Coat Surface
GB/T 19823-2005/ISO 14921:2001 热喷涂 工程零件热喷涂涂层的应用步骤 (ISO 14921:2001,IDT)
GB/T 19824-2005 热喷涂 热喷涂操作人员考核要求 (ISO 14918:1998,MOD)
GB/T 12607-2003 热喷涂涂层命名方法 (代替GB/T 12607-90)
GB/T 12608-2003 热喷涂 火焰和电弧喷涂用线材、棒材和芯材 分类和供货技术条件 (ISO 14919:2001, MOD) (代替GB/T 12608-1990)
GB/T 19352.1-2003/ISO 14922-1:1999 热喷涂 热喷涂结构的质量要求 第1部分:选择和使用指南
GB/T 19352.2-2003/ISO 14922-2:1999 热喷涂 热喷涂结构的质量要求 第2部分:全面的质量要求
GB/T 19352.3-2003/ISO 14922-3:1999 热喷涂 热喷涂结构的质量要求 第3部分:标准的质量要求
GB/T 19352.4-2003/ISO 14922-4:1999 热喷涂 热喷涂结构的质量要求 第4部分:基本的质量要求
GB/T 19355-2003 钢铁结构耐腐蚀防护 锌和铝覆盖层 指南 (ISO 14713:1999,MOD)
GB/T 19356-2003 热喷涂 粉末 成分和供货技术条件 (ISO 14232:2000,MOD) (代替GB/T 12608-1990)
GB/T 8642-2002 热喷涂抗拉结合强度的测定 (ISO 14916:1999,MOD) (代替GB/T 8642-1988)
GB/T 18719-2002 热喷涂 术语、分类 (ISO 14917:1999,MOD)
GB/T 16744-2002 热喷涂 自熔合金喷涂与重熔 (ISO 14920:1999,MOD) (代替GB/T 16744-1997)
GB/T 18681-2002 热喷涂 低压等离子喷涂镍-钴-铬-铝-钇-钽合金涂层
GB 11375-1999 金属和其他无机覆盖层 热喷涂 操作安全 (代替GB 11375-1989)
GB/T 17456-1998 球墨铸铁管 外表面喷锌涂层 (eqv ISO 8179-1:1995)
GB/T 9793-1997 金属和其他无机覆盖层热喷涂 锌、铝及其合金 (eqv ISO 2063:1991) (代替GB 9793-88,GB 9794-88,GB 9795-88,GB 9796-88 )
GB/T 16744-1997 热喷涂 自熔合金涂层 (由GB/T 16744-2002代替)
GB/T 13222-91 金属热喷涂层剪切强度的测定
GB/T 12608-90 热喷涂涂层材料命名方法 (由GB/T 12608-2003和GB/T 19356-2003代替)
GB/T 12607-90 热喷涂涂层设计命名方法 (由GB/T 12607-2003代替)
GB 11374-89 热喷涂涂层厚度的无损测量方法
GB 11373-89 热喷涂金属件表面预处理通则
GB 9796-88 热喷涂铝及铝合金涂层试验方法 (ISO 2063) (由GB/T 9793-1997代替)
GB 9794-88 热喷涂锌及锌合金涂层试验方法 (ISO 2063) (由GB/T 9793-1997代替)
GB 8642-88 热喷涂层结合强度的测定 (由GB/T 8642-2002代替)
GB 8641-88 热喷涂层抗拉强度的测定
GB 8640-88 金属热喷涂层表面洛氏硬度试验方法
JB/T 4108-1999 热喷涂设备 分类及型号编制方法
JB/T 8425-96 铁基喷涂粉末中铬、镍、钼和钒的X射线荧光光谱分析标准试验方法
JB/T 8427-96 钢结构腐蚀防护热喷涂锌、铝及其合金涂层选择与应用导则
JB/T 7703-95 热喷涂陶瓷涂层技术条件
JB/T 7509-94 热喷涂涂层孔隙率试验方法 铁试剂法
JB/T 6973-93 热喷涂操作人员考核要求
JB/T 6974-93 线材喷涂碳钢及不锈钢
JB/T 5070-91 热喷涂常用术语
YB/T 036.13-1992 冶金设备制造通用技术条件 氧-乙炔焰金属粉末喷涂
YS/T 57-93 热喷涂用Fe-Cr-B-Si系合金粉
HG/T 2044-2003 机械密封用喷涂氧化铬密封环技术条件 (代替HG/T 2044-1991)
YY 0304-1998 等离子喷涂 羟基磷灰石涂层-钛基牙种植体
ASTM标准(The American Society for Testing and Materials)
ASTM B833-01a Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing)
ASTM B907-04 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders and for Thermal Spraying
ASTM C633-01 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings涂层结合强度测定
ASTM D4541 Test Method for Pull-Off Strength of Coating Using Portable Adhesion Testers
ASTM E1920-03 Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings金相制备
ASTM E376-03 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Examination Methods无损测厚
ASTM F1044-05 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings剪切强度测试
ASTM F1147-05 Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
ASTM F1160-05 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
ASTM F1926-03 Standard Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Coatings
ASTM F1609-03 Standard Specification for Calcium Phosphate Coatings for Implantable Materials
ASTM F1978-00e1 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the TaberTM Abraser
ASTM F2024-00 X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
ASTM F1580-01 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
DIN (Deutsches Institut für Normung)
DIN EN 582-1994 Thermal spraying; determination of tensile adhesive strength; German version EN 582:1993
DIN EN 657-2005 Thermal spraying - Terminology, classification; German version EN 657:2005
DIN EN 1274-2005 Thermal spraying - Powders - Composition, technical supply conditions; German version EN 1274:2004
DIN EN 1395-1996 Thermal spraying - Accpetance inspection of thermal spraying equipment; German version EN 1395:1996
DIN EN 13214-2001 Thermal spraying - Thermal spray coordination - Tasks and responsibilities; German version EN 13214:2001
DIN EN 13507-2001 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying; German version EN 13507:2001
DIN EN ISO 2063-2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005); German version EN ISO 2063:2005
DIN EN ISO 1463-2004 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003); German version EN ISO 1463:2004
DIN EN ISO 9220-1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988); German version EN ISO 9220:1994
DIN EN ISO 14918-1999 Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998); German version EN ISO 14918:1998
DIN EN ISO 14919-2001 Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification; Technical supply conditions (ISO 14919:2001); German version EN ISO 14919:2001
DIN EN ISO 14920-1999 Thermal spraying - Spraying and fusing of self-fluxing alloys (ISO 14920:1999); German version EN ISO 14920:1999
DIN EN ISO 14921-2001 Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2001); German version EN ISO 14921:2001
DIN EN ISO 14922-1:1999 Thermal spraying – Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use (ISO 14922-1:1999)
DIN EN ISO 14922-2:1999 Thermal spraying – Quality requirements for thermally sprayed structures Part 2: Comprehensive quality requirements (ISO 14922-2:1999)
DIN EN ISO 14922-3:1999 Thermal spraying – Quality requirements for thermally sprayed structures Part 3: Standard quality requirements (ISO 14922-3:1999)
DIN EN ISO 14922-4:1999 Thermal spraying – Quality requirements for thermally sprayed structures Part 4: Elementary quality requirements (ISO 14922-4:1999)
DIN EN ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings
DIN EN ISO 14924-2005 Thermal spraying - Post-treatment and finishing of thermally sprayed coatings (ISO 14924:2005); German version EN ISO 14924:2005
DIN EN ISO 17834-2004 Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures (ISO 17834:2003); German version EN ISO 17834:2003
DIN 27201-10-2005 State of railway vehicles - Basic principles and production technology - Part 10: Thermal spraying
DIN EN 14665-2005 Thermal spraying - Thermal sprayed coatings - Symbolic representation on drawings; German version EN 14665:2004
DIN EN 14616-2005 Thermal spraying - Recommendations for thermal spraying; German version EN 14616:2004
DIN EN ISO 17836-2005 Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2004); German version EN ISO 17836:2004
DIN EN ISO 10308-2006 Metallic coatings - Review of porosity tests (ISO 10308:2006); German version EN ISO 10308:2006
ISO (International Organization for Standardization)
ISO 2063:2005 Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys (热喷涂.金属涂层和其他无机覆层.锌、铝及其合金)
ISO 13779-1-2000 (外科植入物 羟基磷灰石 第1部分:羟基磷灰石)
ISO 13779-2-2000 (外科植入物 羟基磷灰石 第2部分:羟基磷灰石覆涂层)
ISO 13779-4-2002 (外科植入物.羟磷灰石.第4部分:涂层粘结强度的测定)
ISO 14231:2000 Thermal spraying -- Acceptance inspection of thermal spraying equipment (热喷涂 热喷涂设备的验收检查)
ISO 14232:2000 Thermal spraying -- Powders -- Composition and technical supply conditions (热喷涂 粉末 成分和交货技术条件)
ISO 14916:1999 Thermal spraying -- Determination of tensile adhesive strength (热喷涂 抗拉结合强度的测定)
ISO 14917:1999 Thermal spraying -- Terminology, classification (热喷涂 术语、分类)
ISO 14918:1998 Thermal spraying -- Approval testing of thermal sprayers (热喷涂 热喷涂人员的资格考查)
ISO 14919:2001 Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions (热喷涂 火焰和电弧喷涂用金属丝材、棒材和粉芯丝材分类 交货技术条件)
ISO 14920:1999 Thermal spraying -- Spraying and fusing of self-fluxing alloys (热喷涂 自熔合金的喷涂及重熔)
ISO 14921:2001 Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components (热喷涂 工程零件热喷涂涂层的应用步骤)
ISO 14922-1:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 1: Guidance for selection and use (热喷涂 热喷涂结构的质量要求 第1部分:选择和应用指南)
ISO 14922-2:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements (热喷涂 热喷涂结构的质量要求 第2部分:全面质量要求)
ISO 14922-3:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements (热喷涂 热喷涂结构的质量要求 第3部分:标准质量要求)
ISO 14922-4:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements (热喷涂 热喷涂结构的质量要求 第4部分:基本质量要求)
ISO 14923:2003 Thermal spraying -- Characterization and testing of thermally sprayed coatings (热喷涂.热喷涂层的表征和试验)
ISO 14924:2005 Thermal spraying -- Post-treatment and finishing of thermally sprayed coatings (热喷涂.热喷涂层的后处理和加工)
ISO 17834:2003 Thermal spraying -- Coatings for protection against corrosion and oxidation at elevated temperatures (热喷涂.高温下抗腐蚀耐氧化保护涂层)
ISO 17836:2004 Thermal spraying -- Determination of the deposition efficiency for thermal spraying (热喷涂.热喷涂熔敷效率的测定)
AWS (American Welding Society)
ANSI/AWS C2.16/C2.16M:2002 Guide for Thermal Spray Operator Qualification
AWS C2.18-93 Guide for the Protection of Steel with Thermal Sprayed Coatings of Aluminum and Zinc and Their Alloys and Composites
ANSI/AWS C2.23/C2.23M:2003 Specification for Thermal Spray Equipment Acceptance Inspection
ANSI/AWS C2.21/C2.21M:2003 Specification for Thermal Spray Equipment Acceptance Inspection
ANSI/AWS C2.25/C2.25M:2002 Specification for Thermal Spray Solid and Composite Wire and Ceramic Rods
AWS TSS Thermal Spraying
ANSI/AWS C2.20/C2.20M:2002 Specification for Thermal Spraying Zinc Anodes on Steel Reinforced Concrete
BS (British Standards)
BS EN 582-1994 Thermal spraying - Determination of tensile adhesive strength
BS EN 1395-1996 Thermal spraying - Acceptance inspection of thermal spraying equipment
BS EN ISO 14918-1998 Thermal spraying - Approval testing of thermal sprayers
BS EN ISO 14920-1999 Thermal spraying - Spraying and fusing of self-fluxing alloys
BS EN ISO 14922-1-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Guidance for selection and use
BS EN ISO 14922-2-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Comprehensive quality requirements
BS EN ISO 14922-3-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Standard quality requirements
BS EN ISO 14922-4-1999 Thermal spraying - Quality requirements of thermally sprayed structures - Elementary quality requirements
BS EN 13507-2001 Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying
BS EN 13214-2001 Thermal spraying - Thermal spray coordination - Tasks and responsibilities
BS EN ISO 14919-2001 Thermal spraying, Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions
BS EN ISO 14921-2001 Thermal spraying - Procedure for the application of thermally sprayed coatings for engineering components
BS EN ISO 14923-2003 Thermal spraying - Characterization and testing of thermally sprayed coatings
BS EN ISO 17834-2003 Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures
BS EN ISO 17836-2004 Thermal spraying - Determination of the deposition efficiency
BS EN 14665-2005 Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (热喷涂.热喷涂涂层.图纸上的符号表示)
BS EN 14616-2005 Thermal spraying - Recommendations for thermal spraying
BS EN 1274-2005 Thermal spraying - Powders - Composition, technical supply conditions
BS EN ISO 2063-2005 Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys
BS EN 657-2005 Thermal spraying - Terminology, classification
BS EN ISO 14924-2005 Thermal spraying - Post-treatment and finishing of thermally sprayed coatings
JIS
JIS H8304-1994 Ceramic sprayed coatings
JIS H8306-2002 Cermet thermal spraying
JIS H8200-2006 Thermal spraying terms
JIS H8302-2004 Build-up thermal spraying
JIS H8303-2004 Thermal spraying of self-fluxing alloy
JIS H8250-2005 Graphical symbol for thermal spraying
JIS H8300-2005 Thermal spraying -- Zinc, aluminium and their alloys
JIS H8666-1994 Test methods for ceramic sprayed coatings
JIS H8667-2002 Test methods for cermet sprayed coatings
JIS H9302-1994 Recommended practice for ceramic sprayed coatings
JIS H9303-2004 Recommended practice for cermet sprayed coatings
JIS H9304-2005 Recommended practice of self-fluxing alloys spraying
JIS H8401-1999 Methods of thickness measurement for sprayed coatings
JIS G0594-2004 Methods of accelerated cyclic corrosion resistance tests for anodic coatings with exposure to salt spray, dry and wet condition
JIS H8401-1999 Methods of thickness measurement for sprayed coatings
JIS H8402-2004 Test methods of tensile adhesive strength for thermal-sprayed coatings
JIS H8501-1999 Methods of thickness test for metallic coatings
JIS H8502-1999 Methods of corrosion resistance test for metallic coatings
JIS H8503-1989 Methods of wear resistance test for metallic coatings
JIS H8504-1999 Methods of adhesion test for metallic coatings
UNE-EN 13214:2001 THERMAL SPRAYING - THERMAL SPRAY COORDINATION - TASKS AND RESPONSABILITIES
SAE AS7109/1A Nadcap Requirements for Thermal Spray
SSPC 02-14 Chapter 4.4 Thermal-Spray (Metallized) Coatings for Steel
SAE AMS2447C Coating, Thermal Spray High Velocity Oxygen/Fuel Process
TAPPI TIP0402-32 Guidelines for applying thermal spray coatings to protect pulp mill process equipment against corrosion
SSPC 04-13 SSPC-CS 23.00/AWS C2.23/NACE No. 12 Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel
SSPC 04-13 SSPC-QP 6 Standard Procedure for Evaluating the Qualifications of Contractors Who Apply Thermal Spray (Metallizing) for Corrosion Protection of Steel and Concrete Structures
SME EM94-115 Thermal Spray Process Of Polymers And Fillers For A Hard Coat Surface
上一篇:ITSC2013年会议论文集
下一篇:什么是热喷涂