Advanced Coatings for the Aerospace Industry

航天工业用先进涂层

 

Advanced Microscopic Study of Suspension Plasma Sprayed Zirconia Coatings with Different Microstructures

具有不同显微组织的悬浮液等离子喷涂ZrO₂涂层的微观研究

Paweł Sokołowski1, Lech Pawłowski1, Dagmar Dietrich2, Thomas Lampke2, and David Jech3

(1) University of Limoges, Limoges, France

(2) Chemnitz University of Technology, Chemnitz, Germany

(3) Brno University of Technology, Brno, Czech Republic

 

Application of FEM for the Estimation of Thermomechanical Properties of Plasma Sprayed Composite Coatings

FEM在等离子喷涂复合涂层热力学性能评价方面的应用

R. Bolot, D. Aussavy, and G. Montavon, IRTES-LERMPS, UTBM, Belfort, France

 

Cold Spray and Reaction Sintering of Ti-TiAl3 Composite Coatings

Ti-TiAl3复合涂层的冷喷涂和反应烧结

Volf Leshchynsky1, Oleksandra Bielousova2, and Anatoli Papyrin3

(1) University of Windsor, Windsor, ON, Canada

(2) Ecole Nationale d’Ingenieurs de Saint-Etienne (ENISE), Saint-Etienne, France

(3) Cold Spray Technology, Albuquerque, NM, USA

 

Cold Sprayed MCrAlY as a Bondcoat Candidate for TBC Application

冷喷涂MCrAlY作为粘接涂层的候选材料在TBC上的应用

X. Ma and P. Ruggiero, Curtiss-Wright Corporation, East Windsor, CT, USA

 

Comparison of Plasma Sprayed High Entropy Alloys with Conventional Bond Coat Materials

等离子喷涂高熵合金与传统粘接涂层材料的对比

Andrew S.M. Ang1, Christopher C. Berndt1, Mitchell L. Sesso1, Ameey Anupam2, Praveen. S. Ravi Sankar Kottada2, and B.S. Murty2

(1) Swinburne University of Technology, Victoria, Australia

(2) Indian Institute of Technology Madras, Chennai, India

 

Concept Optimization for Coating Application and Quality of APS Applied TBC on Gas Turbine Blades and Vanes

APS作为汽轮机叶片TBC的涂层应用和质量优化理念

Buecklers Tobias and Duda Thomas, Alstom AG, Birr, Switzerland

 

Development of a Two-Stage Hybrid Technology for Repairing Turbine Blades

用于涡轮机叶片修复的二阶段混合技术发展

M. Nicolaus, K. Möwald, and H.J. Maier, Leibniz University Hannover, Garbsen, Germany

 

Effect of Friction-Stir Processing on the Wear Rate of WC-Based MMC Coatings Deposited by Low-Pressure Cold Gas Dynamic Spraying

搅拌摩擦焊工艺对低压气体动态冷喷涂沉积WC基MMC涂层磨损率的影响

H. Ashrafizadeh1, A. Lopera-Valle1, A. McDonald1, A. Gerlich2

(1) University of Alberta, Alberta, Canada

(2) University of Waterloo, Ontario, Canada

 

Eliminating Hexavalent Cr Emissions in Thermal Spray Alloys

热喷涂合金中六价Cr排放物的去除

Justin Cheney1 and Daren Gansert2

(1) Scoperta, San Diego, CA, USA

(2) HAI, Placentia, CA, USA

 

Formation of a Continuous β-NiAl Layer Near the Interface in a γ+β MCrAlY

一种连续β-NiAl 层在γ+β MCrAlY接近界面处的制备方法

Kang Yuan1, Ru Lin Peng1, and Xin-Hai Li2

(1) Linking University, Linkoeping, Sweden

(2) Siemens Industrial Turbomachinery AB, Finspong, Sweden

 

High Sintering-Resistant Plasma-Sprayed Thermal Barrier Coatings Designed with Large Two-Dimensional Inter-Lamellar Pores

大二元片层内孔法设计的高耐烧结等离子喷涂热障涂层

Tao Liu, Shan-lin Zhang, Xiao-tao Luo, Guan-Jun Yang, Cheng-Xin Li, and Chang-Jiu Li

Xi’an Jiaotong University, Xi’an, PR China

 

High Temperature Oxidation of Cold Gas Sprayed Bond Coats for TBC Application

TBC用气体冷喷涂粘接涂层的高温氧化

C.R.C. Lima1, M.J.X. Belém1, V. Crespo2, I.G. Cano2, S. Dosta2, and J.M. Guilemany2

(1) Methodist University of Piracicaba, São Paulo, Brazil

(2) University of Barcelona, Barcelona, Spain

 

HVOF and HVAF Coatings of Nano-Agglomerated Tungsten Carbide−Cobalt Powders for Water Droplet Erosion Application

W-C-Co纳米团聚粉末HVOF and HVAF涂层在水滴冲蚀方面的应用

F. Tarasi, M.S. Mahdipoor, A. Dolatabadi, M. Medraj, and C. Moreau

Concordia University, Montreal, Canada

 

Improving the Adhesion of Wear-Resistant Coatings on Aerospace Polymer Composites

提升耐磨涂层与航天用塑料基复合材料的粘合力

Axelle Elrikh1, Simon Goutier1, Romain Bignon1, Armelle Vardelle1, and Gordon Armstrong2

Université de Limoges, Limoges, France

University of Limerick, Limerick, Ireland

 

Improving the Corrosion Resistance of Thermal Barrier Coatings against CMAS by Depositing Top Ceramic Layer of Enhanced Splat Bonding

通过表面沉积陶瓷层提升热障涂层对CMAS的腐蚀性能

Tao Liu, Li-Shuang Wang, Shu-Wei Yao, Guan-Jun Yang, Cheng-Xin Li,

Xiao-Tao Luo, and Chang-Jiu Li

Xi’an Jiaotong University, Shannxi, P.R. China

 

Influence of APS Process Parameters on Morphologies of YSZ-Polyester Abradable Coatings

APS工艺参数对YSZ聚酯可磨耗涂层形貌的影响

D. Aussavy1, R. Bolot1, G. Montavon1, F. Peyraut2, G. Szyndelman3,

J. Gurt-Santanach4, and S. Selezneff5

(1) IRTES-LERMPS, Belfort, France

(2) IRTES-M3M, Belfort, France

(3) Oerlikon Metco, Wohlen, Switzerland

(4) Turbomeca, Bordes, France

(5) SNECMA, Moissy-Cramayel, France

 

Influence of Pretreatment on the Growth Behavior of TGO on MCrAlY Bond Coat Surface

热处理对TGO在MCrAlY粘接涂层表面长大行为的影响

Bang-Yan Zhang, Guan-Jun Yang, Cheng-Xin Li, and Chang-Jiu Li

Xi’an Jiaotong University, Xi’an, China

 

Investigation of the Deposition Mechanism of Cold Spray onto Carbon Fibre Reinforced Polymers

碳纤维增强塑料基体上的冷喷涂沉积机理研究

Hanqing Che1, Stephen Yue1, and Phuong Vo2

McGill University, Montreal, Canada

National Research Council Canada, Boucherville, J4B 6Y4, Canada

 

Laser Surface Patterning Pretreatment before Thermal Spraying—A Way to Adapt and Control the Surface Topography to the Considered Materials and the Stresses Imposed

热喷涂之前的激光表面蚀刻处理-一种可调节表面形貌与相应材料和外加应力之间关系的方法

Robin Kromer1, Sophie Costil1, Jonathan Cormier2, Laurent Berthe3,

Patrice Peyre3, and Damien Courapied3

(1) Irtes-Lermps Institute, Belfort, France

(2) Institut Pprime, Chasseneuil – Futuroscope, France

(3) PIMM – UMR, Paris, France

 

Manufacturing of Thick, Crack-Free Wear Protective Coatings onComplex Geometries for Gas Turbine Parts

汽轮机复杂形状零部件表面厚且无裂纹的耐磨保护涂层的制备方法

Marcus Riedel and Thomas Duda, Alstom (Switzerland) Ltd., Birr, Switzerland

 

Mechanism of Calcareous Deposit Formation on TSA-Coated Steel Structures at Elevated Temperatures

高温下TSA涂层钢结构的表面钙沉积制备原理

S. Paul1, M.D.F. Harvey1, N.S. Zulkfli2, K. Yunus2, and A.C. Fisher2

(1) TWI, Cambridge, UK

(2) University of Cambridge, Cambridge, UK

 

Microstructure and Properties of Porous Abradable Alumina Coatings Flame-Sprayed by Semi-Molten Particles

半融化颗粒火焰喷涂法制备的多孔可磨耗铝合金涂层的显微组织和性能

Chang-Jiu Li, Jiao Zou, Hui-Bin Huo, Jian-Tao Yao, and Guan-Jun Yang

Xi’an Jiaotong University, Shaanxi Province, PR China

 

Preparation of Inorganic Phosphate Ceramic Coatings on γ-TiAl Based Alloys

无机磷酸盐陶瓷涂层在γ-TiAl基合金表面的制备方法

Lingyan Kong1, Yang Yang1, Jiqiang Wang1, Qing Jia1, Lei Xu1,

Tianying Xiong1, and Xin Yue2

(1) Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China

(2) Shenyang Institue of Chemical Technology, Shenyang, China

 

Process-Property Correlation of Heat-Treated Aluminium 6061 Cold Spray Coatings

热处理6061铝合金冷喷涂涂层的加工性能匹配

Kelvin Loke1, Richard Kwok1, P.K. Koh2, T.C. Lim2, and Philip Cheang2

(1) ST Kinetics Integrated Engineering Pte Ltd, Singapore

(2) SIM University, Singapore

 

Spall Resistant HVOF Coatings

耐剥落HVOF涂层

David Webb1, Richard Vander Straten1, Brad Martin2, and Ron Montgomery2

(1) ES3, Clearfield, UT, USA

(2) 417 SCMS/GUEA - HAFB, UT, USA

 

The Effect of Heat Treatment on Mechanical Properties of Thermally Sprayed Sandwich Structure Beams

热处理对热喷涂夹层结构组合梁力学性能的影响

Saeid Salavati, Larry Pershin, Thomas W. Coyle, and Javad Mostaghimi

Centre for Advanced Coating Technologies, Ontario, Canada

 

The Micro Structure and Tribological Properties of Liquid-Fuel HVOF Sprayed Fine Wc-Co-Cr Coating

液态燃料HVOF喷涂精细Wc-Co-Cr涂层的显微结构和摩擦学性能

Rohit Upadhyaya1, Sharad Shrivastava1, S.C. Modi2, and A. Modi2

(1) Birla Institute of Technology and Science, Pilani, India

(2) Metallizing Equipment Company, Jodhpur, India

 

Thermal Barrier Coatings Performed by Suspension Plasma Spraying—Development and Characterization

悬浮液等离子喷涂法制备的热障涂层-发展和表征

Benjamin Bernard1, Luc Bianchi1, André Malié2, Vincent Schick3, and Benjamin Remy3

(1) CEA-DAM Le Ripault, Monts, France

(2) Safran-Snecma, Châtellerault, France

(3) LEMTA-ENSEM, Vandoeuvre-lès-Nancy, France

 

Thermal Gradient Behaviour of TBCs Subjected to a Laser Gradient Test Rig—Simulating an Air-to-Air Combat Flight

一种激光梯度测试装置控制下的TBCs温度梯度行为-模拟一种空气-空气的战斗飞行

Rogerio S. Lima1, Basil R. Marple1, and Pierre Marcoux2

(1) National Research Council of Canada, Boucherville, Canada

(2) Vac Aero International, Boucherville, Canada

 

Thermal Phase Stability of Various Plasma Sprayed TBCs

多种等离子喷涂TBC的热稳定性

Li Li1 and Benjamin Peterson2

(1) Praxair Surface Technologies, Inc., Indianapolis, IN, USA

(2) Honeywell Aerospace, Phoenix, AZ, USA

 

Transient High Heat Load Performance of Thick VPS W Coating on Relatively Large CuCrZr Substrate

厚VPS W涂层在相对较大CUCrZr基体上的瞬间高热量沉载行为

Chunming Deng, Min Liu, Liping Xu, Kesong Zhou, Changguang Deng,

Ziqi Kuang, and Xiaofeng Zhang

Guangzhou Research Institute of Non-Ferrous Metals, Guangzhou, China

 

Fundamentals/Research and Development

基础/研究和进展

 

A Damage Based Finite Element Simulation of Cold Spray Coating under Indentation Loading

基于有限元模拟的冷喷涂涂层在压痕载荷作用下的破损行为

A. Moridi, S.M. Hassani-Gangaraj, and M. Guagliano, Politecnico di Milano

 

A Novel Coaxially Laser-Assisted (COLA) Cold Spray System

一种新奇的COLA冷喷涂体系

C.M. Allen1, T. Marrocco1, P. McNutt1, H. Koivuluoto2, J. Latokartano2,

P. Vuoristo2, and R. Olsson3

(1) TWI Ltd., Cambridge, UK

(2) Tampere University of Technology, Tampere, Finland

(3) Luleå University of Technology, Lulea, Sweden

 

A Numerical Investigation—Air Plasma Spraying by Means of a Three-Cathode Spraying Torch

数值模拟-空气等离子喷涂利用一个三电极喷涂装置

K. Bobzin and M. Öte, RWTH Aachen University

 

A Three-Dimensional Analysis of the Suspension Plasma Spray Impinging on a Curved Substrate

悬浮液等离子喷涂应用于曲面基体上的一种三维分析

K. Pourang, C. Moreau, A. Dolatabadi, Concordia University

 

Al/Al2O3Cermets by Plasma Spraying—Optical Response of Experimental and Numerical Materials

等离子喷涂Al/Al2O3金属陶瓷-实验室制备材料和数值模拟材料的光学响应

D. Toru1, A. Quet1, H. Piombini1, L. Bianchi1, R. Echegut2, D. De Sousa Meneses2,

L. Del Campo2, and P. Echegut2

(1) CEA DAM Le Ripault, Monts, France

(2) CNRS, Orléans, France

 

An Investigation on Microstructural Properties of Plasma Sprayed Tungsten Carbide Enhanced with Partially Stabilized Zirconia

关于含有部分ZrO₂稳定剂的碳化钨等离子喷涂的微观性能的研究

S. Abuali Galedari, M. Salimi Jazi, F. Azarmi, A. Tangpong, and Y. Huang

North Dakota State University, Fargo, ND, USA

 

Application Mist Cooling Technique Various Type Thermal Spraying Guns

喷雾冷却技术在多种类型热喷涂喷枪上的应用

Takashi Kumai1, Yusuke Nishiura1, Yasuhiro Omori1, Yoshio Shin2, and Toshiharu Morimoto2

(1) Yoshikawa Kogyo, Himeji, Japan

(2) Nakayama Amorphous, Osaka, Japan

 

Ceramics Filler Rods Feeding for Plasma Flame Torch in Thermal Nanoparticles Spraying

纳米颗粒热喷涂中等离子火炬的陶瓷填充物

Soshu Kirihara, Osaka University, Ibaraki , Japan

 

Comparison of Impact Crater Shape and Splat on Various Targets for Estimating Projectile Velocity

为估算弹射速度而比较爆炸形状和痕迹对多种靶材的影响

K. Sakata1, K. Tagomori1, N. Sugiyama1, D. Oka1, Y. Shinya1, H. Sasaki2, Y. Akahoshi3,

K. Norimatsu3, Y. Fujimura3, Y. Fukuda3, and T. Koura3

(1) Fujikikosan Corporation, Kitakyushu, Japan

(2) NAC Image Technology Inc., Tokyo, Japan

(3) Kyushu Institute of Technology, Kitakyushu, Japan

 

Comparison of Simulated and Experimental Particle Mean Temperature and Velocity for Thermal Spray Coating Process

关于热喷涂工艺中粒子平均温度、速度的实验室结果和数值模拟结果之间的对比

S. Shang1, and R.C. Batra1, and M. Cybulsky2

(1) Virginia Polytechnic Institute and State University, Blacksburg, VA, USA

(2) Rolls-Royce Corporation, Indianapolis, IN, USA

 

Constrained Healing and Morphology Change Mechanism of 2D Cracks in Plasma Sprayed Thermal Barrier Coatings

等离子热障涂层中的2D裂纹的受约束愈合以及形貌改变机理

Guang-Rong Li, Juan Lei, Guan-Jun Yang, Cheng-Xin Li, and Chang-Jiu Li

Xi’an Jiaotong University, Shaanxi, China

 

Controlling the Twin Wire Arc Spray Process Using Artificial Neural Networks (ANN)

利用人工神经网络（ANN）控制双丝电弧喷涂工艺

K. Hartz-Behrend1, J. Schein1, J. Schaup1, and J. Zierhut2

(1) LPT, Universitaet der Bundeswehr Muenchen, Neubiberg, Germany

(2) Zierhut Messtechnik GmbH, Munich, Germany

 

Critical Velocity Window for the Deposition of Iron-Based Metallic Glass Particles Using Cold Spray

冷喷涂法沉积铁基金属玻璃颗粒的临界速度窗口

D.E. Cipoletti1, C.W. Ziemian1, W.J. Wright1, K.V. Haile1, M.N. Okwara1,

K.A. Hetherington1, and D.J. Helfritch2

(1) Bucknell University, Lewisburg, PA, USA

(2) TKC Global at the U.S. Army Research Laboratory, Aberdeen Proving Ground, MD, USA

 

Deformation Behavior of Alumina Particles in Compression for Room Temperature Solid-State Deposition

室温固态沉积下的氧化铝颗粒受压变形行为

Pylin Sarobol, Michael Chandross, Jay D. Carroll, William M. Mook, Daniel C. Bufford,

Paul G. Kotula, Bonnie B. McKenzie, Brad L. Boyce, Khalid Hattar, and Aaron C. Hall

Sandia National Laboratories, Albuquerque, NM, USA

 

Detection and Avoiding of Unmelted Wire Pieces during Wire Arc Spraying

丝材电弧喷涂中未熔化丝材碎片的检测和避免

S. Eichler1, S.Kirner1, S. Zimmermann1, J. Schein1, W. Mayr2, and J. Zierhut3

(1) Universitaet der Bundeswehr Muenchen, Neubiberg, Germany

(2) University of Applied Sciences Munich, Munich, Germany

(3) Zierhut Messtechnik GmbH, Munich, Germany

 

Development of the Microstructure and Mechanical Properties of Cold-Sprayed IN718 Alloy Coating by a Novel In-Situ Shot Peening Process

利用一种新奇的喷丸工艺内生的冷喷涂IN718合金涂层的显微组织和力学性能研究进展

Xiao-Tao Luo, Meng-Lin Yao, Cheng-Xin Li, Guan-Jun Yang, and Chang-Jiu Li

Xi’an Jiaotong University, Shaanxi, China

 

Development of Thin WC-12Co Coatings Manufactured by HVOF-Spraying

HVOF喷涂法制备的薄WC-12Co涂层的进展

Wolfgang Tillmann, Peter Hollingsworth, Ingor Baumann, and Marcel Laschitzki

Technische Universit鋞 Dortmund, Dortmund, Germany

 

Eddy Current Measurement Technique for Bi-Layer Thermal Barrier Systems

Bi涂层热障系统中的涡流检测技术

Gregory M. Smith, Nicholas Erb, Mats-Olov Hansson, and Jimmy Johansson

GKN Aerospace Engines Sweden

 

Effect of Alloying Active Elements of Powder on Spreading Behaviour of Plasma Spray Splats

粉末中活性合金元素对等离子喷涂溅射行为的影响

Yongang Zhang1, Margaret Hyland1, and A.T.T. Tran1, and Steven Matthew2

(1) The University of Auckland, Auckland, New Zealand

(2) Massey University, Auckland, New Zealand

 

Effect of Blasting and Spraying Parameters on the Adhesion of Arc Wire Sprayed Aluminum Coatings

喷射和溅射参数对丝材电弧喷涂铝合金涂层的影响

S. Paul, P.J. Aldhous and H.L. de Villiers Lovelock

TWI Ltd, Cambridge, UK

 

Effect of Feedstock Characteristics and Operating Parameters on the Properties of Cr2O3 Coatings Prepared by Suspension-HVOF Spraying

进料特征和操作参数对悬浮液HVOF喷涂法制备的Cr2O3涂层的性能的影响

Filofteia-Laura Toma1, Stefan Scheitz1, Richard Trache1, Stefan Langner1,

Christoph Leyens1, Annegret Potthoff2, and Kathrin Oelschlägel 2

(1) Fraunhofer Institute for Material and Beam Technology, Dresden, Germany

(2) Fraunhofer Institute for Ceramic Technologies and Systems, Dresden, Germany

 

Effect of Spraying Parameters on the Strain of Plasma Sprayed YSZ Coatings Measured by the digital Image Correlation Method during the Tensile Test

喷涂参数对等离子喷涂YSZ涂层在拉伸试验过程中利用数字图像相关法测得的应变值的影响

Lele Ruan, Zexin Yu, Weize Wang, and Yufan Chen

University of Science and Technology, Shanghai, China

 

Effect of Substrate Roughness on the Cratering Phenomenon on the Surface of Cold Sprayed Coating

基体粗糙度对冷喷涂涂层表面缩孔现象的影响

S. Gojon, R. Kromer, S. Costil, G. Douchy, C. Verdy, and H. Liao

IRTES-LERMPS, Belfort, France

 

Effect of Type and Amount of Tungsten Carbides on the Abrasive Wear of Laser Cladded Nickel Based Coatings

碳化钨的类型和数量对激光包覆镍基涂层的磨粒磨损行为的影响

arbara Maroli and Senad Dizdar, Hoganas AB, Hoganas,Sweden

 

Elastic Isotropy of Cold Sprayed Coatings

冷喷涂涂层的弹性各向同性

J. Cizek1, I. Dlouhy1, H. Seiner2, M. Landa2, and R. Huang3

(1) Brno University of Technology, Brno, Czech Republic

(2) Academy of Sciences of the Czech Republic, Prague, Czech Republic

(3) Plasma Giken, Saitama, Japan

 

Electron Microscopy and EBSD Characterization of Cold-Sprayed IN625 Coatings on 4130 Steel

4130钢用冷喷涂IN625涂层的电子显微形貌和EBSD表征

Dheepa Srinivasan1, Ramar Amuthan2, Y.C. Lau3, Atanu Chaudhuri4, Y. Raghupathy4,

Satyam Suwas4, and Chandan Srivastava4

(1) GE Power and Water, Bangalore, India

(2) GE Global Research, Bangalore, India

(3) GE Power and Water, Schenectady, NY, USA

(4) Indian Institute of Science, Bangalore, India

 

Epitaxial Grain Growth during 8YSZ Splat Formation on Polycrystalline YSZ Substrates by Plasma Spraying

在多晶体YSZ基体上等离子喷涂8YSZ层的喷射形成过程中外延晶粒生长

Er-Juan Yang1, Xiao-Tao Luo1, Guan-jun Yang1, Cheng-xin, Li1,

Chang-Jiu Li1, and Makoto Takahashi2

(1) Xi’an Jiaotong University, Shaanxi, PR China

(2) Osaka University, Ibaraki, Japan

 

Evaluation of the Influence of Flame Spraying Parameters on Microstructure and Electrical Conductivity of Al-12Si Coatings Deposited on Polyurethane Substrates

火焰喷涂参数对聚乙烯基体上沉积Al-12Si涂层的显微组织和电导率的影响的评估

H. Ashrafizadeh, P. Mertiny, and A. McDonald

University of Alberta, Alberta, Canada

 

Evolution of Microstructure and Wear Behavior of Heat-Treated and Fused Arc-Sprayed Coatings Containing Fe2B Crystals Dispersed in Different Steel-Based Matrices

散布在不同钢基体的经过热处理和熔化电弧喷涂并含有Fe2B晶体的涂层的显微组织和磨损行为演变

S. Dallaire, Synthesarc Inc., Quebec, Canada

 

Experimental Investigation and Finite Element Simulation of Residual Stress Development in Thermally Sprayed Coatings

热喷涂涂层中残余应力演变的实验室研究和有限元模拟

Mohamed Elhoriny, Martin Wenzelburger, Andreas Killinger, and Rainer Gadow

Stuttgart University, Stuttgart, Germany

 

Fast Coating Deposition Simulation for Path Planning and Iterative Net-Shape Optimization on Complex Workpieces

在复杂工件上的快速涂层沉积模拟 -路径制定和迭代净成型优化

T. Wiederkehr, H. Müller, D. Hegels, W. Tillmann, and L. Hagen

Technische Universität Dortmund, Germany

 

Fatigue Crack Growth in Bodies with Thermally Sprayed Coating

热喷涂涂层主体上的疲劳裂纹生长

O. Kovřarik1, P. Haušild1, J. Medřick?1, L. Tomek1, J. Siegl1, R. Mušalek2, N. Curry3, and S. Bjorklund3

(1) Czech Technical University in Prague, Czech Republic

(2) Institute of Plasma Physics ASCR, Czech Republic

(3) University West, Trollhattan, Sweden

 

Fatigue Performance of TBCs on Hastelloy X Substrate during Cyclic Bending

循环弯曲过程中Hastelloy X合金基体上的TBC疲劳行为

Radek Musalek1, Jan Medricky1, Zdenek Pala1, Ondrej Kovarik2, Libor Tomek2,

Nicholas Curry3, and Stefan Bjorklund3

(1) Institute of Plasma Physics AS CR, Prague, Czech Republic

(2) Czech Technical University in Prague, Prague, Czech Republic

(3) University West, Trollhattan, Sweden

 

Fracture Behavior and Lifetime Performance of Thermal Barrier Coatings in Thermally Graded Mechanical Fatigue Environments

在热梯度疲劳环境中热障涂层的断裂行为和疲劳寿命

Zhe Lu1, Sang-Won Myoung1, Yeon-Gil Jung1, Jing Zhang2, and Ungyu Paik3

(1) Changwon National University, Changwon-si, Gyeongsangnam-do, Republic of Korea

(2) Indiana University-Purdue University Indianapolis, IN, USA

(3) Hanyang University, Seoul, Republic of Korea

 

Fretting Behavior of Cold-Sprayed Cu and Cu-MoS2 Coatings

冷喷涂Cu和Cu-MoS2涂层的微动磨损行为

Yinyin Zhang1, Richard R. Chromik1, Sylvie Descartes2, Edouard Regis2, and Phuong Vo3

(1) McGill University, Montreal, Canada

(2) Université de Lyon, Villeurbanne, France

(3) National Research Council Canada, Boucherville, Canada

 

Fully Nano-Equiaxed-Structured Thermal Barrier Coating Deposited Using Very-Low-Pressure Plasma Spray

利用极低压等离子喷涂沉积的具有完全纳米等轴结构的热障涂层

Yang Gao1, Yan Zhao1, Cheng-qi Sun1, D.-M. Yang1, and Jianyi Gao2

(1) Dalian Maritime University, Liaoning, China

(2) Arizona State University, Tempe, AZ, USA

 

High Dense Fe-Al Composites Made by Annealing of Cold-Sprayed Coatings

冷喷涂涂层退火后制备的高密度Fe-Al复合材料

Evgeny Leshchinsky1, Elena Maeva1, and Oleksandra Bielousova2

(1) The University of Windsor, Windsor, ON, Canada

(2) Ecole Nationale d’Ingenieurs de Saint-Etienne, Saint-Etienne, France

 

High Stability, High Enthalpy APS Process Based on Combined Wall and Gas Stabilizations of Plasma (Part 1: Process and Coatings Introduction)

高稳定性，高热焓APS工艺基于墙和气体综合稳定下的等离子体（第1部分：工艺和涂层介绍）

Gianpaolo Mor1 and Vladimir Belashchenko2

(1) Flame Spray North America, Fountain Inn, SC, USA

(2) Thermal Spray Development, Waltham, MA, USA

xii

 

High Stability, High Enthalpy APS Process Based on Combined Wall and Gas Stabilizations of Plasma (Part 2: Plasma Properties and Process Operating Window)

高稳定性，高热焓APS工艺基于墙和气体综合稳定下的等离子体（第2部分：等离子性能和工艺操作窗口）

Vladimir Belashchenko1 and Alexander Zagorski2

(1) Thermal Spray Development, Waltham, MA, USA

(2) Baden, Switzerland

 

Homogenization of Coating Properties in Three-Cathode Atmospheric Plasma Spraying by Use of Advanced Diagnostics and Numerical Simulation—Investigations of Suspension Plasma Spraying (SPS)

利用先进的诊断技术和数值模拟技术研究三电极大气等离子喷涂中涂层性能的均一性-悬浮液等离子喷涂研究

Stephan Zimmermann1, Sven Schmettlach1, Sebastian Weber1, Jose Marques1,

Guenter Forster1, Klaus Landes1, Jochen Schein1, Christin Lummer2, Patrick Knler2,

Simon Kresnik2, Jens Prehm2, Kai Mohwald2, and Hans J. Maier2

(1) University of Federal Armed Forces Munich, Neubiberg, Germany

(2) Leibniz Universitaet Hannover, Garbsen, Germany

 

Improved Corrosion Resistance of Plasma-Sprayed NiCr-Mo Coating with Shell-Core-Structured Powder by Improving Lamellar Interface Bonding

利用提高层界面结合强度来提高等离子喷涂的具有壳-孔结构粉末的NiCr-Mo涂层的耐腐蚀性能

Jia-Jia Tian, Guan-Jun Yang, Cheng-Xin Li, Xiao-Tao Luo, and Chang-Jiu Li

Xi’an Jiaotong University, Shaanxi, China

 

Improvement of Corrosion Resistance of Thermal-Sprayed Stainless Steel Coating by Addition of Some Deoxidizing Elements

通过添加抗氧化元素来提高热喷涂不锈钢涂层的耐腐蚀性能

H. Era1, K. Hashimoto1, N. Sakoda2, Z. Zeng2, and S. Sako2

(1) Kyushu Institute of Technology, Japan

(2) Kurashiki Boring Kiko Co., Ltd., Kurashiki Okayama, Japan

 

Improving Cold Sprayability—Mixed Metal Powders

提高冷喷涂能力-混合金属粉末

Stephen Yue1, Wilson Wong1, Huseyin Aydin1, Rosaire Mongrain1, Rajib Barua1,

Phuong Vo2, andn Richard Dolbec3

(1) McGill University, Montreal, Quebec, Canada

(2) National Research Council, Boucherville, Quebec, Canada

(3) Tekna, Sherbrooke, Québec, Canada

 

Improving the Fatigue Resistance of Warm Sprayed WC-CoCr Coatings by Micro-Finishing

利用微处理法提高温喷涂WC-CoCr涂层的疲劳性能

W. Tillmann1, J. Nebel1, C. Schaak1, D. Biermann1, S. Goeke1, and G. Matthaus2

(1) TU Dortmund, Dortmund, Germany

(2) Thermico GmbH & Co KG, Dortmund, Germany

 

Influence of Gas Flow Parameters and Nozzle Design on Secondary Atomization in a Rotating Twin-Wire Arc Spray System

气体流动参数和转子设计对旋转双丝电弧喷涂系统中二次原子化的影响

Jean-Baptiste Dev illers 1, Hanlin Liao 1, Christian Coddet 1, and Jean-Marie Malhaire 2

(1) Université de Technologie Belfort-Montbéliard, Sevenans, France

(2) ECAM Rennes – Louis de Broglie, Bruz, France

 

Influence of Grit Blasting on the Interface Roughness and Adhesion Strength of Cold Sprayed Copper Coatings

喷砂处理对冷喷涂铜涂层的界面粗糙度和粘接强度的影响

R.Gr. Maev, V. Leshchynsky, E. Strumban, D. Dzhurinskiy, and E. Maeva

Institute for Diagnostic Imaging Research, Windsor, Ontario, Canada

 

Influence of Microstructure on Thermal Properties of Columnar Axial Suspension Plasma Sprayed Thermal Barrier Coatings

显微组织对柱状等轴悬浮液等离子喷涂热障涂层热力学性能的影响

Ashish Ganvir1, Nicholas Curry1, Nicolaie Markocsan1, Per Nylen1,

Monika Vilemova2, and Zdenek Pala2

(1) University West, Trollhattan, Sweden

(2) IPP Prague, Czech Republic

 

Influence of Process Parameter on Grit Blasting as a Pretreatment Process for Thermal Spraying

工艺参数对喷砂处理（热喷涂的一种预处理工艺）的影响

K. Bobzin, M. e, T. F. Linke, and X. Liao

RWTH Aachen University, Aachen, Germany

 

Influence of Surface Oxide Film on Deposition Behavior of Cold Spray Emulated Particle by Single Particle Shot System

表面氧化膜对冷喷涂单粒子喷射系统中粒子沉积行为的影响

K. Ito, Y. Ichikawa, and K. Ogawa

Fracture and Reliability Research Institute, Tohoku University, Sendai, Japan

 

Influence of the Plasma Radiation Scattered by Inflight Particles on Temperature Measurement in Suspension Plasma Spraying

悬浮液等离子喷涂中飞行粒子散射产生的等离子辐射对温度测量的影响

Bishoy Aziz and Christian Moreau, Concordia University, Montreal, QC, Canada

 

Investigation of a Pulsed Current Wire Arc Spray Process

一种脉冲电流丝材电弧喷涂工艺的研究

S. Kirner, A. Atzberger, S. Zimmermann, J. Schein, and G. Forster

Universitaet der Bundeswehr Muenchen, Neubiberg, Germany

 

Investigation of Alumina and Yttria Coating Microstructures Manufactured by Suspension Plasma Spray

悬浮液等离子喷涂制备的氧化铝和氧化钇涂层显微组织的研究

E. Aubignat1, M.-P. Planche1, G. Montavon1, A. Allimant2, and D. Billieres3

(1) IRTES-LERMPS, Belfort, France

(2) Saint-Gobain C.R.E.E., Cavaillon, France

(3) Saint-Gobain Coating Solutions, Avignon, France

 

Investigation of Flow Parameters in Wire Arc Thermal Spraying Using CFD Simulation

利用CFD模拟丝材电弧热喷涂过程中流体参数的研究

Amirsaman Farrokhpanah1, Larry Pershin1, and Javad Mostaghimi1, and Julien Naffrechoux2

(1) University of Toronto, Toronto, ON, Canada

(2) Polytech Nantes, Graduate School of Engineering, Nantes, France

 

Investigation of the Bonding Mechanisms of Al Coatings on Ceramic Substrates Deposited by Cold Gas Spraying and Magnetron sputtering

在陶瓷基体上利用气体冷喷涂和磁溅射沉积的Al涂层的粘结机理

R. Drehmann1, T. Grund1, T. Lampke1, B. Wielage1, C. Wüstefeld2, M. Motylenko2,

G. Schreiber2, and D. Rafaja2

(1) Technische Universitat Chemnitz, Germany

(2) Technische Universitat Bergakademie, Freiberg, Germany

 

Investigation of the Interface of Overlapping Splats for a WC-Based Cermet

一种WC基金属陶瓷重叠带界面的研究

B. Hussong, V. Lünnemann, and W. Tillmann

Institute of Materials Engineering, Dortmund, Germany

 

Joining of Dissimilar Materials by the Cold Spray Process

利用冷喷涂工艺实现异种材料的连接

Victor Kenneth Champagne III1, Michael K. West2, M. Reza Rokni2, and Todd Curtis2

(1) University of Massachusetts, Amherst, MA , USA

(2) South Dakota School of Mines and Technology, Rapid City, SD, USA

xiv

 

Lithium Iron Phosphate Coatings Deposited by Means of Inductively-Coupled Thermal Plasma

诱导耦合热喷涂沉积磷酸锂铁涂层

K. Major, G. Brisard, and J. Veilleux

Université de Sherbrooke, Sherbrooke, Québec, Canada

 

Low Cost Suspension Plasma Spraying of YSZ Coatings

低成本YSZ悬浮液等离子喷涂涂层

Mohammed Shahien and Masato Suzuki

(1) National Institute of Advanced Industrial Science and Technology, Ibaraki, Japan

 

 

 

                            北矿新材科技有限公司翻译